Search
Rambler's Top100 Rambler's Top100





 »  Main  »  Polyfoam  »  Equipment  »  Cycled Pre-Frothing Device

Cycled Pre-Frothing Device (Pre-Frothing Device)

 

Pre-frothing device FP-03 for polyfoam producing.

Description:

Pre-frothing device is a cylindrical capacity, inside having an activator of stainless steel for granules scrambling. Rotation of activator is provided by engine-reductor. Pre-frothing device is supplied with device for manual loading of raw material, unloading is made with the help of pneumatic remodeling system ventilator. As warmer water steam is used which is given through perforated bottom sheets of stainless steel.

Appointment: Pre-frothing device is appointed to primary and secondary frothing of granules by warm processing method. Secondary frothing is possible with the help of additional device only.

Principe of work: Mode of work is periodical. Capacity is hermetic that allows to save steam and inner redundancy atmosphere. That raises speed of frothing in comparison with pre-frothing device of unceasing action.

Modernization:

Pre-frothing device with double winterized walls model FP-04. Winterizing is used for steam saving and quality of granules upgrade..

Pre-frothing device with inner cavity of stainless steel model FP-05. Application of stainless steel increases corrosion stability of inner cavity.

Pre-frothing device with double winterized walls and inner cavity of stainless steel model FP-06.Joining of these features saves steam, upgrades quality of granules, increases stability of product.

Secondary frothing device is applied as additive to any model, is used to get easier granules.

Automatic block of pre-frothing device. Provides automation in the process of raw material dosage from accumulating bunker, regulating the process of steaming, unloading of granules to hold-distribution bunker.

Drying device with warm air pressure provides speed-up process of drying and stabilization. Is provided with ventilator, transporter for dry granules moving.

Technical Features:

Name of parameter

Meaning

1

Nominal capability in a cycle, m3

1,0

2

Capability of a device, m3/hour, not less

10

3

Useful amount of capacity, m3

1,2

4

Density grade of polyfoam

15, 25,35, 50

5

Amount mass of frothed mite (by ordinary frothing), kg/m3

12...40

6

Working (redundancy) steam pressure Pg, MPa, not more

0,03

7

Rotation frequency of activator

71

8

Working steam temperature, C

104..108

9

Steam consumption for pre-frothing device, kg/hour

20..30*

10

Dimension size (capacity diameter), mm

1100х1250х2800

11

Mass, kg

530

12

Service norm, person

1

Electric equipment features

1

Power current type

Variable three-phase

2

Nominal current frequency

50

3

Nominal circuit pressure

380

4

Quantity of electric engines in installation

1

5

Nominal drive power

4 kW

6

Model and type of engine-reductor

4 MC2C-100

Note: steam generating equipment must provide pressure 5…6 atm., steam capability not less than 30 kg/hour


ВП-03
ВП-04
Устройство вторичного вспенивания

ВП-03. Предвспениватель циклический  ВП-04. Предвспениватель циклический  Устройство вторичного вспенивания