|
Description: polystyrene crusher consists of loading square-wave hole, cylindrical crushing zone with rotating shaft inside. Rotation is sent by belt to electric engine. In the exit there is a net with meshes correlating the size of crushed polystyrene.
Appointment: crushing device is for waste pulverizing. .
Principe of work: polystyrene waste is loaded to device hole and go to working zone where is crushed. Crushed polystyrene is deleted from working zone by ventilator of pneumatic remodeling then through pipeline to hold-distribution bunker.
Advantages:
-
Crusher's principle of work, its power and hardness allows to crush thick and mould polyfoam. Reception capacity doesn't reduce.
-
Net in the exit allows to get smaller fraction.
-
Crusher has got spare toughness doesn't demand heavy repair for a long time.
Modernization:
-
Special dimension of meshes can be made by customer's order (from 8 to 25 mm );
-
Different power can by used (4 kW – 5,5 kW), it influences throughput
Technical features:
Name of parameter | Meaning |
1 | Max throughput, m3/h | 3,0 |
2 | Crusher type | Gavel |
3 | Loading hole diameter, mm | 450x130 |
4 | Amount mass of worked out polyfoam, kg/m3 | 9...50 |
5 | Shaft rotation frequency, turns/min | 1460 |
6 | Service norm | 1 |
7 | Fraction size, mm | 11...15 |
8 | Dimension size, mm, not more, wideness*length*height | 800х1220х750 |
9 | Mass, kg | 180 |
Electric equipment features |
10 | Power current type | Variable three-phase |
11 | Nominal current frequency, hertz | 50 |
12 | Nominal circuit pressure, W | 380 |
13 | Quantity of transformators in installation | 1 |
14 | Nominal power, kW | 4 |
Note: crusher must be provided by forced blowjob of polyfoam mite. |
|
версия для печати